Ten Pinterest Accounts To Follow About Ghost Immobiliser And Tracker > 자유게시판

본문 바로가기

자유게시판

Ten Pinterest Accounts To Follow About Ghost Immobiliser And Tracker

페이지 정보

작성자 Joanna Blaxland 연락처 작성일 25-04-02 10:28 조회 96회 댓글 0건

본문

cropped-KeyLab-1.pngAutowatch Ghost II Immobiliser Review

Autowatch Ghost immobiliser is the next-generation in car security. It is inaccessible to thieves, and it is impossible for them to start the car without a specific pin code.

The system is based on the CAN Data network of your vehicle and is silent, so it cannot be detected with standard radio signals or diagnostic tools. It doesn't require any circuit cuts to be made before installing.

What is a ghost immobiliser?

A Ghost Immobiliser can help safeguard your vehicle from theft by making it impossible to start the vehicle until a unique pin code is entered. It can be used in a range of vehicles, and unlike standard immobilisers, this one does not require a fob or key to operate. It is also difficult to hack or bypass and operates in complete silence. This means that thieves will need to be quick to flee without being caught.

It guards against signal jamming, spoofing and key cloning - all methods that thieves have employed to unlock cars equipped with standard immobilisers. It also stops thieves from stealing keys by sifting through your mailbox or gaining access into your home to take the remote control. It will also stop them from driving away your pride and joy if they have managed to steal the key, since it blocks the vehicle from starting unless they enter a code first.

In contrast to passive immobilisers which require the fob or key to be activated, a ghost immobiliser is designed to be sealed inside the engine and connects directly to the vehicle's CAN data circuit. It makes use of buttons on the steering wheel or centre console, or door panels to create an individual pin code that you must enter before the engine starts. The system can be set to a service mode, which allows your car to drive and start for short periods without requiring a PIN code. However the service mode will end according to speed and time.

Due to the technology employed, it is unable to be hacked or bypassed, even using advanced technology like RF scanning or code grabbing devices. It is also impossible to disable with a standard vehicle immobiliser as it doesn't transmit a signal like a standard one and only works by connecting directly to the data circuit in CAN.

Because of its high-tech technology and ease of installation the ghost immobiliser is now insurance Approved by TASSA (Tracking & Aftermarket Security System Association). We are a proud TASSA approved Ghost installer and can put the device into your vehicle for insurance purposes.

How does a Ghost Immobiliser work?

In simple words, an immobiliser operates by stopping your vehicle from starting if the wrong fob or key is used. This is done by sending an error code from the wrong fob or key to the ECU (Engine Control Unit). The ECU will not recognize it and your car will not start. This is the reason it's essential to ensure that your car is fitted with an immobiliser installed by a recognised and reputable specialist.

MotorGuard is the Midlands most trusted security expert for vehicles and installer. We offer an Autowatch Ghost immobiliser fitting service for a wide selection of modern cars so you can be sure that your prized possession is protected against potential thieves.

The Autowatch Ghost is the first aftermarket CAN bus immobiliser system in the world. It shields your vehicle from key-cloning, hacking, as well as theft. It's designed to remain undetected by thieves because it doesn't have LED indicators or key fobs, and can be hidden within the wiring of your vehicle, so that no extra hardware is needed.

After installation the system is connected to the CAN system of your vehicle and lets you create a unique disarm sequence with your own pin code which you have to enter in order to drive the vehicle. This pin code can be up to 20 presses long to provide security. If you forget your pin code or if the button has broken there is a secure emergency code that can be used. This will allow your vehicle start again.

It is because the Ghost immobiliser cannot be manipulated or hacked, that it is an effective deterrent for thieves. In addition, it is also TASSA insurance approved (Tracking and Aftermarket Security Systems Association) which may reduce the cost of your car insurance.

Ghost immobilisers continue to improve as technology improves. This is why we recommend that you contact an Autowatch Ghost immobiliser installer as soon as possible to ensure that your enjoyment is completely protected. Whether you're buying a new car or want to upgrade your vehicle, you can count on us to provide you with high-quality service, so that you can take pleasure in your joy and pride for years to be.

Is the Ghost Immobiliser a good fit with my car?

The ghost ii immobiliser is the world's first aftermarket CAN bus immobiliser system that provides total protection against modern-day vehicle theft. It offers protection against key cloning and car hacking as well as ECU swapping. The new TASSA verified Ghost-II systems also provide the ability to mark your vehicle and connect to the International Security Register enabling your insurance company to confirm that you have a legitimate Ghost system in place.

Our Ghost Immobiliser prevents theft by making it necessary for a unique pin code be entered, or your smartphone to be equipped with our Autowatch App installed. It works like a PIN for a bank card and makes it impossible to leave with your pride and joy without entering the correct pin or phone. Our Ghost Immobiliser System is integrated into the CAN Data Network so there is no wire cutting needed and the system is completely silent. It is invisible to thieves and can't be detected by sophisticated RF scanning or code grabbing technology that other systems employ.

When the Ghost is fitted by our expert fitters, it's completely hidden and undetectable to the naked eye. it makes use of the buttons on your vehicle, such as those on the steering wheel, door panels and centre console to create a unique pin code sequence that must be entered before the engine can start, much like a password for a bank account. It is then connected to your smartphone using the autowatch ghost 2 immobiliser app to allow you to go into a temporary "Service or Valet" mode that disables the ghost for up to 30 minutes as you transfer your vehicle for repair or transport.

With the high level of personalisation & modification being employed in today's vehicles, along with the fact that a majority of us are driving older vehicles, it's no wonder that the number of stolen vehicles has risen dramatically. Many of them are expensive and scarce vehicles that take a long time to repair after being stolen, so making sure your car is not at risk of becoming the next target is paramount. Ghost immobilisers are an affordable investment that will protect your vehicle and can even be used to retrieve the vehicle in the event of theft.

Does a Ghost Immobiliser function by cutting principle?

Ghost immobilisers prevent your vehicle from starting until a PIN is entered along with your key fob. This stops thieves from copying your keys to steal into your car's system and can convince them to leave your car to themselves.

Once installed, your ghost immobiliser creates a unique pincode of up to twenty digits, which you can enter using the buttons on your vehicle (steering wheels, centre consoles, or door panels). This code must be entered to start your vehicle. This code sequence must be entered each time you wish to drive your car as it is similar to a PIN or password on a bank card. The code can be easily reset by entering a sequence of numbers into the Ghost application.

The Autowatch Ghost II CAN immobiliser also has two deactivation options for valet and service, which allows you to temporarily start your car without a code for access as the key fob, while it's in the garage or with a valet parking service. The immobiliser then will be activated automatically when your vehicle is in a parking spot.

The Ghost is distinct from other security devices on the market. It doesn't have any LED indicators, and it works completely silently using the CAN data network that is in your vehicle. It is also not prone to the same types of circuit cuts that are found in other security gadgets, since it doesn't use radio waves.

It can also be concealed and discreetly installed, making it impossible for thieves to detect and discover. It is also not detectable by advanced scanning tools or code grabbing technologies that are commonly employed to identify or disable security devices.

The Ghost is an advanced, high-quality CAN bus immobiliser. It provides excellent protection against key replicating and relay theft as also car hacking. It is simple to set up and is undetectable by thieves. It is not able to be deactivated by simple wire cutting. This makes it a must for any driver who wishes to safeguard their vehicle.

댓글목록

등록된 댓글이 없습니다.

Copyright © 한국엔젤만증후군협회 All rights reserved.
본 사이트의 상단 메인이미지의 저작권은 이지우님에게 있습니다.